Mechanical
Engineering
 Wayne
A Yevoli - Vice President -
Mr. Yevoli has over 24 years of
engineering and design experience including design from
conception through construction document preparation and
observation. He has performed projects for both
public and private sector clients in the following
areas: institutional, medical, educational, government,
industrial, research, and laboratory. Mr. Yevoli's
specific areas of expertise include heating and cooling
systems, ventilation, specialized exhaust systems,
domestic plumbing, medical gases, fire protection and
site utilities. Mr. Yevoli is currently the
supervisor for the mechanical group where he was
responsible for the management of a staff of 10.
His duties include business development with new and
existing clients, writing proposals, day to day
management of the design projects including preliminary
engineering, design analysis, personnel assignment,
projects including preliminary engineering, design
analysis, personnel assignment, man-hour loading, QA/QC
of the final design. In addition, he is
responsible for personnel recruitment, training and
salary administration. Registrated in Colorado,
Arizona, and California.
WayneY@cmenm.com
 Brian
Padget - Mechanical Engineer -
Mr. Padget has 26 years of engineering
and design experience in mechanical engineering.
He is experienced in the design of mechanical systems
(HVAC and fluid transfer) and has focused on working a
project from initial concept through design and
construction to a final realization. Specialized
training includes design for building indoor air
quality, energy efficiency compliance code, technical
assistance reporting, and energy audits.
Registered in New Mexico and Missouri. BrianP@cmenm.com
 Patrick
McMahon - Mechanical Engineer -
Patrick
McMahon has been a mechanical engineer for 23 years, 16
of those years as a consultant engineer doing HVAC
design and product development for HVAC equipment
managers. As a consulting engineer Pat designed
and managed HVAC upgrades for numerous office buildings,
research and development labs in the Bay area of
California. He has extensive experience in HVAC
control systems, temperature and humidity control in
research and development labs and large chilled plant
facilities. Registered in New Mexico.
PatM@cmenm.com
 Richard
Keach - Senior Mechanical Designer -
Mr. Keach
has been with CME for 28 years, and is highly qualified
in design for new mechanical systems, modifications, and
alterations for existing systems and plumbing design.
He is currently designing systems for several school
districts in southeast New Mexico, including Dexter,
Artesia, Carlsbad and Ruidoso. RichardK@cmenm.com
 Tony
C. de Baca - Senior Mechanical Designer -
Mr.
C. de Baca has been a Mechanical Designer for more than
25 years with experience in new mechanical systems,
modifications and alterations to existing systems,
plumbing design, and upgrading for ADA modifications.
Projects include educational, governmental, medical and
industrial facilities throughout the state of New
Mexico. Mr. C. de Baca is currently providing
open-end task-oriented mechanical design and liaison
services to Albuquerque Public Schools. He has two
decades of experience in quality control and
coordinating with subcontractors in the construction
administration phase of projects.
TonyC@cmenm.com
 Marcelo
Olivares - Mechanical Designer -
Mr. Olivares
has been a Mechanical Designer and a CADD operator for
11 years. He is experienced in new mechanical
systems, modifications and alterations to existing
systems, plumbing design, and upgrading for ADA
modifications. Projects include educational,
governmental, medical and industrial facilities
throughout the state of New Mexico.
MarceloO@cmenm.com
 Michelle
Giraudo - Mechanical Designer -
Ms. Giraudo
has been a Mechanical Designer and a CADD operator for
15 years. She has experience in new mechanical
systems, modifications and alterations to existing
systems, plumbing design, and upgrading for ADA
modifications. Projects include educational,
governmental, medical and industrial facilities
throughout the state of New Mexico.
MichelleG@cmenm.com
Paul Dunagan - Mechanical Designer -
Mr. Paul Dunagan has been a Mechanical Designer for 7 years with experience in Mechanical Engineering and Project Management for new mechanical systems, modifications and alterations to existing systems, and plumbing design. He has performed mechanical engineering design for power generation plants, water re-use sites, educational schools, governmental buildings, retirement facilities, university and industrial facilities throughout the state of New Mexico. He has also conducted site visits, pre-bid meetings, construction and project management of various projects involving power generation and mechanical design. His responsibilities include project design of mechanical systems including: HVAC, dust suppression, fuel, water, coal delivery and plumbing. He also has experience in system troubleshooting, project management, specifications, drawing review, construction management, schedule reporting, and final and operability inspections..
PaulD@cmenm.com
 Paul
Swiderski - Mechanical Designer -
Profile
In 1999, Paul Swiderski was a Mechanical Engineering intern with our company. That same year began his studies at The University of New Mexico and was accepted to the Mechanical Engineering Department. Paul graduated fours years later with a Bachelor's of Science in Mechanical Engineering (BSME). Paul returned to CME in 2007 as a Mechanical Designer and is an Engineer In Training (EIT). He is currently working on several LEED projects and specializes in energy modeling and simulation.
PaulS@cmenm.com
|
Electrical
Engineering
 Dan
W Romero - Chief Electrical Engineer
President
-
Mr Romero
has 33 years experience in electrical design and
engineering. As chief electrical engineer, Mr.
Romero has responsibility for project design involving
electrical systems for government facilities, private
and institutional projects. He has extensive
experience in control systems, and low and medium
voltage power distribution systems. Mr. Romero
also supervises and coordinates the company's CADD
operations. Registered in New Mexico, Arizona,
Florida and Colorado.
DanR@cmenm.com
 Jeffrey
Mettling - Senior Electrical Designer -
Mr. Mettling
has 15 years of experience in Electrical Design and
Project Management for electrical projects. His
experience also includes 3 years in Office Management.
He has performed electrical engineering design for
educational and medical facilities, state buildings,
office buildings, industrial structures, restaurant,
residential, historical buildings, and has conducted
studies, site investigations, aided in bidding and
negotiations, and construction management. His
responsibilities include project design of electrical
distribution systems, lighting and special systems
including but not limited to fire alarm, security, CCTV
and data/communications systems, project management,
specifications, construction management, final
inspections, and cost control.
JeffM@cmenm.com
 Melvin
R. Kidder - Senior Electrical Designer -
Mr. Kidder
has 30 years of experience as an electrical designer.
Responsibilities included completed layout and design of
lighting, power distribution, fire alarm, nurse call,
master TV antenna and public address systems for
commercial, industrial, medical, and other project
types. Also, fixture and equipment selection,
sizing and layout; cost estimating; specifications,
feeder and branch circuit sizing; emergency;
distribution; field investigation; voltage drop, and
short circuit.
MelK@cmenm.com
 Phillip
Springer - Senior Electrical Designer -
Mr. Springer
has 33 years of experience in the field of electrical
design. He has been responsible for plans,
specifications, production and construction management
of a variety of projects. His project experience
includes elementary, secondary and higher educational
facilities, office buildings, churches, hotels,
apartment complexes, shopping centers, restaurants,
medical facilities, correctional facilities,
courthouses, government projects, and industrial
projects.
PhilS@cmenm.com
 Pamela
Dreier - Electrical Designer -
Ms. Dreier
has 15 years of experience as a CADD operator and an
electrical designer. Responsibilities include
layout and design of lighting power distribution, fire
alarm, systems for commercial, industrial, medical and
other project types. Also, her experience includes
fixture and equipment selection. sizing and layout;
feeder and branch circuit sizing; distribution; field
investigation; voltage drop, and short circuit.
PamD@cmen.com
 G.
Robert Moran - Electrical Engineer -
Mr. Moran
has 44 years experience as an electrical engineer.
Experience includes government projects, public
educational facilities, institutional projects, hotels,
shopping centers and various other jobs in the private
sector. Areas of specialized expertise include
design of low, medium and high voltage electrical
distribution and transmission and life safety,
communications and building automation systems. He
is registered in New Mexico, Texas, Colorado, Arizona,
and California.
GRM@cmenm.com
|
